Creep Testing

Creep Testing

The Stress Rupture and Creep Testing Lab at WMT&R has the capability of performing a variety of tests, such as:



  • Creep Rupture
  • Stress Rupture
  • Cyclic Rupture
  • Embrittlement Relief
  • Static Notch


Creep/stress rupture tests are conducted at temperatures up to +2200°F to either ASTM E139 (creep and smooth-bar stress rupture) or ASTM E292 (notch tests). Temperature and creep readings are recorded by computers and continuously monitored to insure utmost accuracy. The creep test program is capable of recording strain readings up to 120 times per hour. This information is utilized to maintain temperature tolerances during a test and also to access a temperature history report for each completed test. The test temperatures are monitored by a centrally located multi-screen monitoring system.

creep testing monitor

Stress and creep rupture tests are also conducted in various environments under vacuum or inert atmospheric conditions. Maximum temperature for these tests is in excess of +1700°F. Tests are usually performed on materials that exhibit excessive corrosion at elevated temperatures in an air environment. The reduced section of a creep test specimen can also be strain-gaged as a means of measuring the amount of strain during testing.

Cyclic rupture testing is designed to load and unload a test sample at certain time intervals. The test temperatures range from room temperature to +2200°F. Prior to starting a test, four strain gages are attached to the test specimen to insure that bending strains are within specification requirements.

Stress Rupture and Creep Testing machinesTest specimens

The static notch test is performed at room temperature under a constant load for a minimum of 5 hours to determine if the material is notch sensitive at room temperature.

The embrittlement relief test is also performed at room temperature, but for 200 hours under a load of some percentage of either the yield strength or ultimate tensile strength. Typically, this test is conducted in accordance with ASTM F 519 at 75% of the yield strength to determine if the material is susceptible to hydrogen embrittlement.

In this department there are over 400 creep/stress rupture machines available.

We have the facilities, equipment, and expertise to meet requests for variations of creep/stress rupture testing.

WMT&R has the capability of testing a number of various sizes and shapes of test specimens, some of which are shown below.

Continue Reading

  • Share This!

Need Creep Testing? Fill out our secure online form and we’ll respond quickly.

Request Quote

Info Request
Request Quote